3DPAM2022 | Global Conference on 3D Printing and Additive Manufacturing

Scientific Board

Prof. Dr. Nima Shamsaei

Director NCAME
Auburn University
USA

Prof. Dr. Shoujin Sun

Griffith University
Australia

Prof. Dr. Geoffrey Mitchell

Vice-Director CDRSP
Polytechnic Institute of Leiria
Portugal

Prof. Dr. Shi-chune Yao

Carnegie Mellon University
USA

Dr. Flavio Bartolomeu

University of Minho
Portugal

Prof. Dr. Rossi Setchi

Cardiff University
United Kingdom

Prof. Dr. Salima Bouvier

The University of Technology of Compiegne
France

Prof. Dr. Adinel Gavrus

INSA Rennes
France

Prof. Dr. Andrey Chuvilin

CIC nanoGUNE
Spain

Prof. Dr. Marco Alfano

University of Waterloo
Canada

Prof. Dr. Daolun Chen

Ryerson University
Canada

Prof. Dr. Soshu Kirihara

Osaka University
Japan

Prof. Dr. Rashid K Abu Al-Rub

Khalifa University
UAE

Prof. Dr. Kaveh Ostad-Ali-Askari

American University
UAE

Prof. Dr. Bekir Sami Yilbas

King Fahd University
UAE

Prof. Dr. Wei Min Huang

Nanyang technological University
Singapore

Prof. Dr. Vladimir G Chigrinov

Hong Kong University
China

Prof. Dr. Farid Menaa

University of California San Diego
USA

Prof. Dr. Jung-Chang Wang

National Taiwan Ocean University
Taiwan

Prof. Dr. Chang Woo Lee

Kyung Hee University
South Korea

Prof. Dr. Osman Adiguzel

Firat University
Turkey

Prof. Dr. Akiyoshi Osaka

Okayama University
Japan

Prof. Dr. Hadj Sahraoui Omar

Algerian Space Agency
Algeria

Prof. Dr. R. M. Mehra

Sharda University
India

Prof. Dr. Mohammad Azadi

Semnan University
Iran

Asst. Prof. Dr. Ruben Pereira

University of Porto
Portugal

Dr. Hicham Es-soufi

University Moulay Ismail
Morocco

Dr. Dariusz Jacek Jakóbczak

Technical University of Koszalin
Poland

Dr. Evangelos Kordatos

Sheffield Hallam University
United Kingdom

Dr. Pengcheng Liu

The University of Texas
USA

View All

Aim

Our aim to bring together leading academic scientists, researchers and research scholars to exchange and share their experiences and research results on all aspects of 3D Printing and Additive Manufacturing.

Objective

To provide a premier interdisciplinary platform for researchers, practitioners and educators to present and discuss the most recent solutions adopted in the fields of 3D Printing and Additive Manufacturing.

Dates to remember

Abstract Submission Deadline
August 29, 2022
Early Bird Registration
August 24, 2022
Conference Dates
November 10-11, 2022

About Conference

Global Conference on 3D Printing and Additive Manufacturing is scheduled for November 10-11, 2022 in Valencia, Spain, and will bring together researchers in all fields related to 3D Printing. This conference, organized by PAGES Conferences, provides wonderful opportunities to introduce upcoming participants to this field and showcase innovative approaches and tools.

This year's edition will include 20+ Plenary, Keynote, Invited Speakers, and social events that will provide huge networking opportunities for the participants.

There will be more than 25 presentations during the conference under the tracks of Introducing 4D Printing, Powder for Metal, Laser Powder Bed Fusion of Metals and Alloys, Fatigue of Additively Manufactured Lattice Materials, Numerical Simulation of Additive Manufacturing Processes, 3D Printing of Porous Materials for Application, Multi-Scale Multi-Physics Modeling of 3D Additive Printing of Metal Products, Challenges in the Aerospace, Prediction of Metal Additive Manufacturing and Likewise, under interesting topics.

There are 20+ universities and companies involved, such as Warsaw University of Technology, Carnegie Mellon University, University of Trento, Georgia Institute of Technology, The Chalmers University of Technology, CTC GmbH, Arcelor Mittal Global Research and Development, Indaero Grupo Emergy, CITD Engineering & Technologies, Filamentive, and many other universities and companies contribute more than 14+ hours of content to the conference.

We are grateful to all the participants who made the 3DPAM2022 conference a great success in Valencia, Spain. A special thank you goes out to our media partner 3D Printing & Design and you can find our Abstract Book

Best Regards,

Elena G

Submit Abstract Register Now

Plenary Speakers

Prof. Dr. Shi-chune Yao

Carnegie Mellon University
USA

>> View Biography

Prof. Dr. Matteo Benedetti

University of Trento
Italy

>> View Biography

Prof. Dr. Michele Chiumenti

International Center for Numerical
Methods in Engineering
Spain

>> View Biography

Prof. Dr. Roland Logé

Ecole Polytechnique Federal De Lausanne
Switzerland

>> View Biography

Prof. Dr. Eduard Hryha

The Chalmers University of Technology
Sweden

>> View Biography

Prof. Tomasz Wejrzanowski

Warsaw University of Technology
Poland

>> View Biography

Ravi Toor

Director at Filamentive
United Kingdom

>> View Biography

Marta García-Cosío

Director
CiTD Engineering & Technologies
Spain

>> View Biography

Keynote Speakers

Darío González Fernández

CEO
INDAERO GRUPO EMERGY
Spain

>> View Biography

Prof. Steven Y. Liang

Georgia Institute of Technology
USA

>> View Biography

Prof. Dr. Geoffrey Mitchell

Vice-Director CDRSP
Polytechnic Institute of Leiria
Portugal

>> View Biography

Prof. Dr. Monica Campo
Gomez

Rey Juan Carlos University
Spain

>> View Biography

Manuel Sánchez Poncela

ArcelorMittal Global Research and Development
Spain

>> View Biography

Dr. Mostafa Yakout

University of Alberta
Canada

>> View Biography

Dr. Fernando Lasagni

Center for Advanced
Aerospace Technologies
Spain

>> View Biography

Biography

Fernando Lasagni: MSc. in Chemical Engineering at Comahue National University (Argentina) in 2003 and Ph.D. holder on composite materials and light alloys from the Vienna University of Technology in 2006 (laureate with honours). There, he was involved in several research programs in collaboration with industrial partners in the field of light metals and MMCs. He was laureate in 2007 with the Fritz-Grasenick Prize of the Austrian Society of Electron Microscopy and with 2 cover pages of the prestigious Journal of Advanced Engineering Materials (2006 and 2008) for his contributions in the field of FIB tomography. During 2008 he was involved in the development of porous materials for heat pipes at IberEspacio S.A. (Madrid, Spain). Currently he is Chief Technical Officer (CTO) Materials&Processes at CATEC as well as honorary Professor at the Seville University. His main activities are related with managing and coordination of aerospace research projects in the field of additive manufacturing, automation & robotics, advanced NDT methods & systems and structural testing, within the national and international community, in conjunction with the main actors of the aerospace community. He has also a long trajectory in Structural Health Monitoring demonstrated along different projects and the coordination of 2 PhD theses. Mr. Lasagni has a scientific record of more than 220 contributions in peer-reviewed journals, conference proceedings and participations, 3 patents and 4 intellectual property registers. He acted as Spanish representative during the Additive Manufacturing harmonization meetings at the European Space Agency in 2014 and co-representative 2017. Lasagni coordinates as well the additive manufacturing group of the Spanish Platform for Aerospace (PAE). He has been also awarded with the Georg Sachs prize of the German Society of Materials (DGM) for his contributions in the industrialization of Additive Manufacturing for aerospace (2018); and recently (2019) with the “Domingo Faustino Sarmiento Award” of the Argentinian senate for his contributions in applied research and engineering. Lasagni owns a relevant experience in AM technologies for the development of applications in the aerospace field, including space missions like CHEOPS, PROBA3, QUANTUM, JUICE JUpiter ICy moons Explorer, Mars Sample Return, etc., and aircrafts like the AIRBUS A320neo, A400M, C295 and the Clean Sk2 aircraft demonstrator and RACER helicopter.